Canon IMAGEFORMULA CR-190I M111021 Operation & Maintenance Manual page 9

5
Instruct scanning to start from the software application.
NOTE
• When Using the Accompanying Scanning Utility for CR-190i:
There are three scanning methods as follows. Follow the each
instruction.
Scan 1 page
Click [Scan Page] from the [File] menu.
Scan Batch to File
a Click [Scan Batch to File] from the [File] menu.
b Input the File name, and then click [Save].
c Select Simplex or Duplex, and then click [Start Scanning].
Scan Batch to Printer
a Click [Scan Batch to Printer] from the [File] menu.
b Select Simplex or Duplex, and then click [Start Scanning].
• You can also start scanning with pressing the START Button.
6
Scanning starts.
NOTE
• If "Sort Method" is set in the software application, the document will
be ejected to one of the three Eject Pockets according to the sort
methods that have been set.
Eject Pocket 1
• When printing with the imprinter, ink may get on the leading edge of
the document because the documents are ejected onto the printed
surface.
• When Using the Accompanying Scanning Utility for CR-190i:
Scanning is suspended and a message is displayed when the Eject
Pocket becomes full of documents. Scanning resumes when the
documents are removed from the Eject Pocket (Eject Pocket full
detection).
Eject Pocket 3
Flapper
Separates documents
Eject Pocket 2
8
Ink residue
Printed text or bitmap
(back side)