Advertisement
TRANSMITTER SETTING
LEARN
3 V
TRANSMITTER FUNCTION
6
5
1
4
2
3
1hr
3hr
6hr
To use factory pre-programmed setting - Skip the below programming steps.
Insert battery into transmitter, turn on the power supply to fan and it is ready
to use.
Read all the steps BEFORE proceeding. Each step must be followed exactly
O
0
in order to program the transmitter.
FIRST ONE USE INSTRUCTION
D
1
1) Dial up to position"O", it is on/off only for the lighting, and it is the brightest
of the light.
2) Dial down to position"D", the brightness of the light can be control low or
high.(*This function requires adjustable brightness product support).
SECOND ONE USE INSTRUCTION
1) If you have more than 1 unit of this fan model in close proximity, it is
equipped self-learning, please don't press any key when self-learning.
2) To set the second one down to the position of "1" (set to "0" position on
one product when used directly).
3) Turn on the power of the light fan.
4) Within 30 sec after the "Beep", press and hold the LEARN button for 3
sec. Once the receiver has detected and learned the frequency, the receiver
will "Beep" twice, meanwhile the light will bright out twice. Programming/self-
learning process is completed and fan is ready to use.
FAN SPEED
6
Fan speed 1 – 6 control (1-low speed, 6-high speed)
5
1
4
2
3
Turns off the fan
Timing the fan
Auto off after 1 hr
1hr
Auto off after 3 hr
3hr
Auto off after 6 hr
6hr
Cancel timing setup
Forward or reverse operation: change fan rotating direction.
Natural Wind: Press the button to change fan rotating direction. Fan speed
changes within its range creating gentle natural wind effect.
Lamp on-off control
When the first one dial down to the position of "D" and the light is on, long press
the button adjustable light, dimmer in the process, when the light bulbs reach to
most bright and dark, have a "Beep" sound tip respectively.
requires adjustable brightness product support).
Installation & Operating Instructions for the
Parrotuncle Owner's Installation, Manual
WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER
F8216110V
(*This function
Advertisement
