F8218/F8220 Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER THANK YOU FOR YOUR PURCHASE Thank you for purchasing this quality product. To ensure correct function and safety, please read and save all instructions before using the product SAFETY TIP To avoid possible electric shock, turn off...
Page 4
F8218/F8220 Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER Metal Washer(4PCS) Blade Bracket Screw(18PCS) Mounting Screw(2PCS) Fastener Washer(4PCS) Balanced parts Wood Screw(2PCS) package(1PCS) Mounting Screw(2PCS) Lock Washer(2PCS) Wire Nut (3PCS) Mounting bracket black white green Remote control (1PCS)
Page 5
F8218/F8220 Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER Outlet box washers Screws...
Page 6
F8218/F8220 Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER Finish...
Page 7
F8218/F8220 Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER FROM POWER SOURCE AC 110- 120 VOLT 60Hz . from house from fan blue black black white white white pink green green gray green green LIGHT MUST BE KEPT AT THE ON P0SITION...
Page 8
F8218/F8220 Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER Finish...
F8218/F8220 Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER Remote controller GENERAL INFORMATION FAN MUST BE KEPT AT THE HIGH SPEED...
Page 10
F8218/F8220 Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER Remote controller GENERAL INFORMATION 1 hour / 4hour / 8hour. (not included) ON/OFF the light Natuarl wind (The fan speed automatic cycle between 1 to 6 speed) (the light ON 5~20 minutes every 2 hours)
Page 11
F8218/F8220 Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER Press and release reversible switch button from transmitter to control fan direction: forward or reverse.
Page 12
F8218/F8220 Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER [5.12in] size of product D 0.83in x L 6in [7.44in] [9.72in] 65in for F8218 / 72in for F8220...
F8218/F8220 Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER TROUBLESHOOTING GUIDE Table of Contents 1. Fan / Remote is not working 2. Fan is noisy 3. Fan Wobbles 4. Light is not working Please refer to the instruction sheet for detailed directions and descriptions of installation steps and requirements.
Page 14
F8218/F8220 Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER 3. THE FAN WOBBLES Verify all blades and blade bracket screws are secure (most fan wobble problems are caused by loose parts). Once fan is properly installed, run the ceiling fan for 10 minutes to let the fan self-adjust.
Page 15
F8218/F8220 Manual WARNING: SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER AFTER INSTALLATION WOBBLE” The fan blades have been adjusted in the factory to minimize any wobble NOTE:CEILING FANS TEND TO MOVE DURING OPERATION DUE TO THE FACT THAT THEY ARE MOUNTED ON A RUBBER CROMMET.
Need help?
Do you have a question about the F8218 and is the answer not in the manual?
Questions and answers