Table of Contents
Advertisement
4
The ASIO Direct Sound Full Duplex Setup dialog box will be displayed. Check only the input
port and output port [USB Audio CODEC] checkboxes and click [OK] to close the dialog box.
5
Check that [USB Audio CODEC-1] and [USB Audio CODEC-2] are assigned to the [Port System
Name] in the [Ports] fi eld of the Device Setup window and tick the [Visible] checkboxes. Then,
click [OK] to close the Device Setup window.
(If the checkboxes are already ticked, just click [OK].)
* If the "State" is not "Active", refer to page 28.
· If the [Port System Name] field does not change, close and restart the Cubase AI 4, then open the Device Setup
NOTE
window.
· In case of Windows Vista, input port names may not be indicated. In that case, go through the following steps.
1. From the [START] menu click [Control Panel], then double-click the "Sound" icon to open the "Sound" dialog
window.
2. Click the "Recording" tab, right-click the "2-USB Audio CODEC" icon and select "Properties."
3. Click the "Advanced" tab, then select "2 channel, 16 bit, 44100 Hz (CD Quality)" or "2 channel, 16 bit, 48000 Hz
(DVD Quality)" in the "Default Format" fi eld.
AUDIOGRAM6
25
Advertisement
Table of Contents
