Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Wellav NB100U
Summary of Contents for Wellav NB100U
- Page 1 NB100U Portable Encoder User Manual V1.0...
- Page 2 About This Manual This manual provides introductions to users about how to operate the device correctly. The content includes introduction to product installation, product characteristics and product settings, etc. It is highly suggested users to go through this document before actually operating the device. Intended Readers This manual is suggested to be studied by the following readers: ...
- Page 3 Important Avoid personal injury and product damage! Do not proceed beyond any symbol until you fully understand the indicated conditions. You may find this symbol in the document that accompanies this product. This symbol indicates important operating or maintenance instructions. ...
- Page 4 Notices Trademark Acknowledgments All trademarks shown in this manual are trademarks of their respective owners. Publication Disclaimer Our company assumes no responsibility for errors or omissions that may appear in this publication. We reserve the right to change this publication at any time without notice. This document is not to be construed as conferring by implication, estoppel, or otherwise any license or right under any copyright or patent, whether or not the use of any information in this document employs an invention claimed in any existing or later issued patent.
- Page 5 Safety Instructions This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Electric Shock Hazard This equipment meets applicable safety standards.
- Page 6 Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
- Page 7 WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Revision History Date Version...
-
Page 8: Table Of Contents
Contents 1 OVERVIEW ........................... 8 Product Introduction ....................8 Front Panel & Rear Panel Overview................8 2 INSTALLATION..........................9 2.1 Installation Procedure ......................9 2.2 Preparation before Installation ................... 9 2.3 Check Package and Accessories..................10 2.4 Equipment Wiring and Connection ................... 10 2.4.1 Power Connection ...................... -
Page 9: Overview
1 OVERVIEW 1.1 Product Introduction StreamCast NB100U is a cost-effective single-channel encoder which can encode, record and stream. The versatile streamcast platform has different models with IP and USB options for live encoding, streaming and local playback and recording. 1.2 Front Panel & Rear Panel Overview Front Panel 1. -
Page 10: Installation
1. SDI / YPbPr / AV＆CC /HDMI IN port 2. RJ45-- management connection port 3. RF OUT port 4. DC -- DC Power connection 2 INSTALLATION 2.1 Installation Procedure Preparation before Installation Check Package and Accessories Setup Connection (signals, wiring) Parameters Configuration System Debug... -
Page 11: Check Package And Accessories
Using the proper power connections is vital to the safe operation of the portable encoder. Only use the supplied power cord or one with equal specifications. 2.4. 2 Connection Setup for Web Management Connect NB100U Management port with a network cable and set up a management network with the management PC. -
Page 12: Connection Setup For Hdmi/Cvbs/Sdi Signal Input
2.4.3 Connection Setup for HDMI/CVBS/SDI signal input Connect HDMI/CVBS/SDI signal to NB100U “HDMI IN”/”AV ＆ CC IN”/ “YPbPr IN”/”SDI IN” port with a HDMI / AV ＆ CC / YPbPr /SDI cable. 3 OPERATION GUIDE 3.1 Front Panel Operation 3.1.1 Power Up and Initialize Before powering-up the device, make sure that all cabling is correct (refer to chapter 2.4 of this... - Page 13 Playing Record Paused SDI/ Auto Live Input HDMI/YPbPr Live UDP/RTP/RTSP/HLS Live Output Live/Modulation/R live x.x.x.x Live IP 1234 Live Port Back Work Sequence Mode Clrcle Single Playback Mode Clrcle List Clrcle Random Playback x.x.x.x Playback IP 1234 Playback Port Back Setting Auto Recorded...
-
Page 14: Web Interface Operation
PC/server to the same network switch. 2. The NB100 default IP address is 192.168.1.106 . Please modify the management server’s IP address or NB100u IP address to be in the same IP section. To ensure that the equipment is smoothly connected to the network. -
Page 15: Main Interface
Wireless connection to device: Please refer to 3.3.6 System Wi-Fi Hotspot. 3.2.2 Main Interface NB100U provides 3 working modes: Live, Playback and Recording. Click to enter desire working mode. (PIC-3.2.2) Live Mode: to encode a live channel via HDMI/SDI/CVBS input and IP output. - Page 16 Basic Setting Pic-3.2.2.1 This interface provides the main parameters of encoding and broadcasting. Please check and set This interface provides the main parameters of encoding and broadcasting. Please check and set This interface provides the main parameters of encoding and broadcasting. Please check and set the parameter according to the following items: according to the following items: ...
- Page 17 Pic-3.2.2.1-2 HLS Setting User can view Encrypt/HLS URL(Ethernet) HLS URL(Ethernet) parameter. Pic-3.2.2.1-3 RTP Setting User can set RTP IP/Port parameter parameter. Pic-3.2.2.1-4 RTMP Setting User can set RTMP FMS URL/Stream/Port/Encryt parameter RL/Stream/Port/Encryt parameter.
- Page 18 Pic-3.2.2.1-5 Advanced Setting To configure the advanced setting for encoding and streaming, please click the setting for encoding and streaming, please click the “Advanced Settings” chars in blue. It will reflect to the new page to set the detailed parameters for chars in blue.
- Page 19 Note: For Empty BitRate, Empty BitRate, there may be a PCR error if set to 0! Pic-3.2.2.3 Video Info (refer to Pic-3.2.2.3) 3.2.2.3) Video Source: base on the source you selected in base on the source you selected in basic setting page ...
- Page 20 GOP Structure: IBBP, IPPP,IBP,IBBBP GOP Size: 6-63 GOP Close: Enable/Disable Close Caption: Enable/Disable Note: When input signal is detected and the preset output signal is of the allowed ones (see mapping table below), the preset will be remained, otherwise the output resolution will changed to Auto automatically.
- Page 21 720x576_50i 720x480_60i: 720x480_60i 720x576_50i 720x576_50i Audio Info(Dolby D St Creator) Pic-3.2.2.4 Audio Source: Audio HDMI/MIC Audio PID: ranging from 32-8190 Audio Encoding Mode: AC3/MPEG1 Layer2/MPEG2 AAC-LC/MPEG4 AAC-LC Audio Bitrate: User can choose certain bitrate AC3 AC mode: 1+1(L,R) ...
-
Page 22: Playback Mode
Click the Status icon on the right-bottom to get reflect to the live status page. The page displays and updates the real-time status of encoding and streaming. 3.2.4 Playback mode Basic Setting 1. Plug one USB disk to USB port on the front panel of the NB100Uto play the TS from the disk. 2. - Page 23 Note: The Playback interface will save and display the : The Playback interface will save and display the TS list from memory of the last USB disk. If TS list from memory of the last USB disk. If there is no disk connected. : to add new Play list.
-
Page 24: Recording Mode
Note: If the USB disk is not connected or the there is not enough space on the disk, it is not able to start the recording. The minimum available free space is 10MB. The NB100U will overwrite the first file it created when the free space is not enough, all those files which are not created by NB100U will not be affected. -
Page 25: System
3.3.6 System The System page provides the Network parameters checking & setting, Language setup, time the Network parameters checking & setting, Language setup, time the Network parameters checking & setting, Language setup, time setup, upgrade, log and system info checking. ( setup, upgrade, log and system info checking. - Page 26 Pic3.3.3.3) The NB100U can be configured to use DHCP to obtain an IP address/Subnet Mask/Gateway. To obtain an IP address may require up to one minute. Pic-3.3.6.3 Wi-Fi Hotspot: This page shows how to set a Wi-Fi Hotspot which enable PC, Hand phone or Tablet PC to log in via wireless connection to the device.
- Page 27 hotspot, Wi-Fi reception is disabled automatically, vice versa. Language: English and Chinese are available to pick. Pic-3.3.6.4 Time: to configure the system time sync with Manual or Internet time. Pic-3.3.6.5 Upgrade: to upgrade new version software by select a file and click the Arrow button. It will take several minutes to finish the upgrading and after that, it will automatically reboot.(Refer to Pic-3.3.3.6) Pic-3.3.6.6...
- Page 28 Pic-3.3.6.7 Logs: User can export& clear the logs in this interface. Pic-3.3.6.7-1 Debug: User can check the debug info which is usually used for R-D. Pic-3.3.6.7-2 Configuration: User can export configuration (including system and service configuration) in this tab. Pic-3.3.6.7-3 License: User can export&...
- Page 29 Pic-3.3.6.7-4 System information: User can check system info in this tab. Pic-3.3.6.7-5...
Need help?
Do you have a question about the NB100U and is the answer not in the manual?
Questions and answers