1. Manuals
  2. Brands
  3. Wellav Manuals
  4. Media Converter
  5. NB100
  6. User manual

Wellav NB100 User Manual

Portable encoder
Hide thumbs
Table of Contents

Advertisement

Quick Links

NB100 Portable Encoder
User's Manual
V2.02-N
DVBCommunity - cообщество профессионалов ЦТВ
https://dvbcommunity.ru/

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the NB100 and is the answer not in the manual?

Questions and answers

Related Manuals for Wellav NB100

Summary of Contents for Wellav NB100

  • Page 1 NB100 Portable Encoder User’s Manual V2.02-N DVBCommunity - cообщество профессионалов ЦТВ https://dvbcommunity.ru/...
  • Page 2 Preface About This Manual This manual provides introductions to users about how to operate the device correctly. The content includes introduction to product installation, product characteristics and product settings, etc. It is highly suggested users to go through this document before actually operating the device. Intended Readers This manual is suggested to be studied by the following readers: ...
  • Page 3 Important  Avoid personal injury and product damage! Do not proceed beyond any symbol until you fully understand the indicated conditions. You may find this symbol in the document that accompanies this product. This symbol indicates important operating or maintenance instructions. ...
  • Page 4 Notices  Trademark Acknowledgments All trademarks shown in this manual are trademarks of their respective owners.  Publication Disclaimer Our company assumes no responsibility for errors or omissions that may appear in this publication. We reserve the right to change this publication at any time without notice. This document is not to be construed as conferring by implication, estoppel, or otherwise any license or right under any copyright or patent, whether or not the use of any information in this document employs an invention claimed in any existing or later issued patent.
  • Page 5 Safety Instructions This warning symbol means danger. You are in a situation that could cause bodily injury. Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with standard practices for preventing accidents. Electric Shock Hazard This equipment meets applicable safety standards.
  • Page 6 Important Safety Instructions  Read these instructions.  Keep these instructions.  Heed all warnings.  Follow all instructions.  Do not use this apparatus near water.  Clean only with dry cloth.  Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
  • Page 7 WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. Revision History Date Version...

  • Page 8: Table Of Contents

    Contents 1 CHAPTER1 OVERVIEW ........................9 1.1 Introduction ........................9 1.2 Architecture......................... 9 Front Panel ..........................9 Rear Panel ..........................9 2 CHAPTER2 INSTALLATION ......................10 2.1 Installation Procedure ....................... 10 2.2 Preparation before Installation ..................10 2.3 Check Package and Accessories..................11 2.4 Equipment Wiring and Connection ...................
  • Page 9 3.2 Operating the WEB Interface .................... 14 3.2.1 Access Interface ...................... 14 3.2.2 Main Interface ......................15 3.2.3 Live Mode ....................... 16 3.2.4 Playback mode ....................... 24 3.3.5 Recording Mode ..................... 26 3.3.6 System ........................27 DVBCommunity - cообщество профессионалов ЦТВ https://dvbcommunity.ru/...

  • Page 10: Chapter1 Overview

    1 CHAPTER1 OVERVIEW 1.1 Introduction StreamCast NB100 is a highly effective encoder for video and audio processing which supports HDMI/SDI/CVBS standard input source and output as RTSP/HLS/UDP/RTP/RTMP Ethernet protocol. The NB100 supports one channel HD/SD live encoding and IP streaming out.

  • Page 11: Chapter2 Installation

    4. DC 2-- DC Power connection 2 CHAPTER2 INSTALLATION 2.1 Installation Procedure Preparation before Installation Check Package and Accessories Setup Connection (signals, wiring) Parameters Configuration System Debug Finish 2.2 Preparation before Installation Before installation, the installation personnel should read through and confirm the followings: ...

  • Page 12: Check Package And Accessories

    -Prong grounding pin. This could cause damage to the Portable Encoder. 2.4.2 DC Power Connection The NB100 encoder is intended to be use on either 120V or 240V systems. The power supply will automatically detect the system which is connected to. To hook up the power use the following steps: 1.

  • Page 13: Portable Power Connection (Dc2)

    2.4.3 Portable Power Connection (DC2) The DC power supply option allows the NB100 to be powered by a separate supply to supply 5V/2A power to the DC2 port. To hook up the power use the following steps: 1. Locate the DC power cord which is included with the NB100.

  • Page 14: 2Front Panel Menu Structure

    Booting… The initialization takes about 20 seconds to complete, and then the LCD screen display as following: Note: If the unit fails to initialize and hangs at the “booting” stage, switching off the device and then powering up again may help. If the device still fails to initialize, please contact your service representative for help.

  • Page 15: Operating The Web Interface

    PC/server to the same network switch. 2. The NB100 default IP address is 192.168.1.106 . Please modify the management server’s IP address or NB100 IP address to be in the same IP section. To ensure that the DVBCommunity - cообщество профессионалов ЦТВ...

  • Page 16: Main Interface

    Wireless connection to device: Please refer to 3.3.6 System Wi-Fi Hotspot. 3.2.2 Main Interface NB100 provides 3 working modes: Live, Playback and Recording. Click to enter desire working mode. (PIC-3.2.2) Live Mode: to encode a live channel via HDMI/SDI/CVBS input and IP output.

  • Page 17: Live Mode

    Pic-3.2.2 3.2.3 Live Mode To set the parameters for HD/SD channels encoding, as well as the broadcasting mode and parameters. Basic Setting Pic-3.2.2.1 This interface provides the main parameters of encoding and broadcasting. Please check and set the parameter according to the following items: DVBCommunity - cообщество...
  • Page 18  Input: Auto/HDMI/SDI/ YPbPr /AV source can be selected  Output: support UDP/RTSP/HLS/RTP/RTMP/QAM protocol  Mode: Ethernet / Ethernet or Wi-Fi can be selected  Network Card: support Ethernet  IP/Port: you can configure the IP streaming output address UDP Setting User can set Mode/Network Card/IP/Port parameter.
  • Page 19 Pic-3.2.2.1-3 RTP Setting User can set RTP IP/Port parameter. Pic-3.2.2.1-4 RTMP Setting User can set RTMP FMS URL/Stream/Port/Encryt parameter. Pic-3.2.2.1-5 QAM Modulation Setting DVBCommunity - cообщество профессионалов ЦТВ https://dvbcommunity.ru/...
  • Page 20 QAM Modulation is custom-made feature with additional hardware. In Output setting we can find output ‘Modulation’. Pic-3.2.2.1-6 User can set Frequency from 66000 to 858000 KHz. Symbol Rate is from 3000 to 6956KBaud. Pic-3.2.2.1-7 QAM mode support 16/32/64/128/256QAM output. DVBCommunity - cообщество профессионалов ЦТВ https://dvbcommunity.ru/...
  • Page 21 Pic-3.2.2.1-8 The output power Level Range is from -31.5 to 0dB. Pic-3.2.2.1-9 Advanced Setting To configure the advanced setting for encoding and streaming, please click the “Advance” chars in blue. It will reflect to the new page to set the detailed parameters for Live Mode. It contains three parts of configuration: Stream info, Video info and Audio info (Dolby D St Creator) Pic-3.2.2.2 ...
  • Page 22 Pic-3.2.2.3  Video Info (refer to Pic-3.2.2.3)  Video Source: base on the source you selected in basic setting page  Video PID: ranging from 32-8190  Video Encoding Mode: DVB/MPEG  Video Resolution: Auto/User can choose certain output resolution ( Resolution Supported: HD: 1920 x 1080@24p/25p/30p/50i/60i,1280 x 720@50p/60p/25p/30p SD: 720 x 576@50i, 720 x 480@60i)
  • Page 23  Video Level: H.264 3.0/ H.264 3.1/ H.264 3.2/ H.264 4.0/ H.264 4.1/ H.264 4.2  GOP Structure: IBBP, IPPP,IBP,IBBBP  GOP Close: Enable/Disable Note: When input signal is detected and the preset output signal is of the allowed ones (see mapping table below), the preset will be remained, otherwise the output resolution will changed to Auto automatically.
  • Page 24 720x576_50i 720x480_60i: 720x480_60i 720x576_50i 720x576_50i  Audio Info(Dolby D St Creator) Pic-3.2.2.4  Audio Source: HDMI Audio source could be selected  Audio PID: ranging from 32-8190  Audio Encoding Mode: AC3/MPEG1 Layer2/MPEG2 AAC-LC/MPEG4 AAC-LC  Audio Bitrate: 128K/192K/256K/384K  AC3 AC mode: 1+1(L,R), 1/0(C), 2/0(L,R) ...

  • Page 25: Playback Mode

    Basic Setting 1. Plug one USB disk to USB port on the front panel of the NB100 to play the TS from the disk. 2. Click the PLAYBACK icon to get the playback page, which will list all the available TS from the USB disk.
  • Page 26 Note: The Playback interface will save and display the TS list from memory of the last USB disk. If there is no disk connected. : to add new Play list. The default play list is named “default”. : to delete the existing Play list. : to modify the play list name.

  • Page 27: Recording Mode

    Note: If the USB disk is not connected or the there is not enough space on the disk, it is not able to start the recording. The minimum available free space is 10MB. The NB100 will overwrite the first file it created when the free space is not enough, all those files which are not created by NB100 will not be affected.

  • Page 28: System

    3.3.6 System The System page provides the Network parameters checking & setting, Language setup, time setup, upgrade, log and system info checking. ( Pic-3.3.6.1) Pic-3.3.6.1  Network Status: This page shows status of network related info: Pic-3.3.6.2 DVBCommunity - cообщество профессионалов ЦТВ https://dvbcommunity.ru/...
  • Page 29 Ethernet: to set up equipment management access IP address, Subnet Mask, Gateway and etc.(see Pic3.3.3.3) The NB100 can be configured to use DHCP to obtain an IP address/Subnet Mask/Gateway. To obtain an IP address may require up to one minute.
  • Page 30 Note: Wi-Fi hotspot and Wi-Fi reception have the same range. When it is used as a hotspot, Wi-Fi reception is disabled automatically, vice versa.  Language: English and Chinese are available to pick. Pic-3.3.6.4  Time: to configure the system time sync with Manual or Internet time. Pic-3.3.6.5 ...
  • Page 31  Development: to export& clear the logs, check the debug info, export configuration, export& upgrade license, view system information and etc. Pic-3.3.6.7 Logs: User can export& clear the logs in this interface. Pic-3.3.6.7-1 Debug: User can check the debug info which is usually used for R-D. Pic-3.3.6.7-2 Configuration: User can export configuration (including system and service configuration) in this tab.
  • Page 32 Pic-3.3.6.7-3 License: User can export& upgrade license, please do reboot to active the license. Pic-3.3.6.7-4 System information: User can check system info in this tab. Pic-3.3.6.7-5 DVBCommunity - cообщество профессионалов ЦТВ https://dvbcommunity.ru/...

Table of Contents