Troubleshooting Guide - Braun MultiServe KF901AI Manual

Troubleshooting guide

PROBLEM
Display does not show a time
Display flashes "2:00"
It is not possible to set the TIMER
It is not possible to activate the TIMER
Coffee is not brewing
The coffee maker is only brewing water
The coffee maker is overflowing
There are coffee grounds at the bottom of
the carafe
Display shows "Lid"
Display show E02, E05, E08, E09, E16,
E18
Display shows E03, E04, E06, E07, E10,
E11, E12, E14, E15, E17
Display shows E13
Display shows E21
Display shows E19
Please do not dispose of the product in the
household waste at the end of its useful life.
Disposal can take place at a Braun Service
Centre or at appropriate collection points
provided in your country.
8
CAUSE
The appliance is unplugged
Initial operation
There was a power outage
Lever not positioned in "Coffee" position
Clock has not been set
TIMER has not been set
The appliance is unplugged
Power outage
Brew mode has not been selected
There is no water in the water tank
The appliance is in stand-by mode
TIMER has not been activated
Lever is positioned on
Filter lid is not closed
There are no coffee grounds in the filter
basket
Lever is positioned on "Water"
The filter basket is not properly inserted
Using too much coffee grounds
Using coffee that is too finely ground
The filter basket spring popped out dur-
ing cleaning
The paper filter was not inserted correctly
into the filter basket
Paper filter collapsed
Coffee powder is too finely ground
Lid of the filter is open
„Over ice" function has not been selected
when ice cubes are filled in the carafe
The beverage size option selector is not
positioned correctly
Materials and accessories coming into
contact with food conform to EEC
regulation 1935/2004.
SOLUTION
Plug in unit
Set clock
• Position lever in position "Coffee"
• Set clock time
• Set TIMER
• Plug unit in
• Wait for power to be restored
• Select brew mode to start
• Fill water in the water tank
• Switch appliance on
• Activate the TIMER
• Place lever in position "Coffee"
• Close filter lid
Add desired amount of coffee to the filter
Place lever in position "Coffee"
Insert the filter basket correctly
Remove filter from filter basket and
restart brewing process with proper
amount of coffee grounds
Use only coffee that is ground for trip
coffee makers
Reattach the spring to the filter basket
Remove filter, rinse filter basket, set filter
into the filter basket and restart brewing
Remove filter, rinse filter basket, set filter
into the filter basket and restart brewing
Use only coffee that is ground for drip
coffee makers
Close the lid
Remove the carafe. Unplug the appli-
ance, wait for 5 minutes and plug in
again. Perform a decalcification. If the er-
ror persists contact an authorised Braun
customer service.
Remove the carafe. Unplug the appli-
ance, wait for 5 minutes, plug in again
and retry. If the error occurs again
contact an authorised Braun customer
service.
Fill the water tank. Switch off and switch
on again. If the error remains contact an
authorised Braun customer service.
Unplug the appliance, rotate the
beverage size option selector to
single-cup position , wait for 5 minutes
and plug-in again. If the error occurs
again contact an authorized Braun
customer service.