Bosch Professional GBS 100 A Original Operating Instructions page 8

OBJ_BUCH-300-002.book Page 8 Friday, June 6, 2008 12:02 PM
8 | English
When working with the power tool, always
hold it firmly with both hands and provide
for a secure stance. The power tool is guided
more secure with both hands.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Keep your workplace clean. Blends of mate-
rials are particularly dangerous. Dust from
light alloys can burn or explode.
Always wait until the power tool has come to
a complete stop before placing it down. The
tool insert can jam and lead to loss of control
over the power tool.
Do not use the power tool with a damaged
cord. Do not touch the damaged cord and
pull the plug from the outlet when the cord
is damaged while working. Damaged cords
increase the risk of an electric shock.
Functional Description
Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the tool and leave it open.
Intended Use
The power tool is intended for dry sanding – with
high removal capacity – of wood, plastic, metal,
filler as well as varnished surfaces.
2 610 946 666 | (6.6.08)
Product Features
The numbering of the product features refers to
the illustration of the power tool on the graphics
page.
1 Dust bag
2 Lock-on button for On/Off switch
3 Outlet piece
4 On/Off switch
5 Dial control for belt speed preselection
(GBS 100 AE)
6 Wing bolt for adjustment of auxiliary handle
7 Auxiliary handle
8 Clamping lever for sanding belt
9 Sanding belt*
10 Adjustment knob for belt run
11 Protection cover
12 Dust passage
*The accessories illustrated or described are not in-
cluded as standard delivery.
Bosch Power Tools