Set Up Access Point Name (Apn) - Beckhoff CU8210-D004-0200 Manual

5.2

Set up Access Point Name (APN)

Initially and once only, the USB stick must be given the access point name (APN), the access point of the
network provider. You must ask your provider for the appropriate access point information. The tool
Beckhoff LTE Stick is available for setting up the APN.
You can also set up the LTE stick using AT commands via a tool such as PuTTY (see: Use AT commands
[} 18]).
Requirements:
• Inserted SIM card.
• The Beckhoff LTE Stick tool. Provided by Beckhoff Service.
Proceed as follows:
1. Run the program bhf.ltestick.exe as administrator.
The tool scans the system for connected LTE sticks.
2. If the SIM card requires a PIN, you will be prompted to enter a PIN.
CU8210-D004-0200 Version: 1.0
Configuration
15