Insert Sim And Microsd Card - Beckhoff CU8210-D004-0200 Manual

Insert SIM and microSD card

4 Insert SIM and microSD card
Short circuit
The SIM card or the USB stick can be damaged. Do not remove the SIM card during operation and switch
the Industrial PC off.
In this work step we show you how to insert a SIM and microSD card in the USB stick. Use the nano-SIM
card format for the SIM card slot.
If you insert a microSD card into the USB stick, the stick can also be used as a removable data storage
device. MicroSD cards with up to 32 GB storage capacity are supported.
Proceed as follows:
1. Push the cover of the USB stick back and remove it.
2. Push the SIM card into the SIM card slot with the chip facing downwards. The diagonal edge points away
from the USB plug.
3. Push the microSD card into the microSD card slot with the contacts facing down.
4. Place the cover on the USB stick and push it forwards until it engages again.
ð In the next step you can establish a connection to the mobile communication network.
12
NOTE
Version: 1.0 CU8210-D004-0200