Configuration; Installing The Driver - Beckhoff CU8210-D004-0200 Manual

5

Configuration

5.1

Installing the driver

In this work step we show you how to install the driver for the 4G USB stick. The appropriate driver is already
on the USB stick. Following the installation, a new network interface is created in Windows.
Proceed as follows:
1. Connect the USB stick.
2. The USB stick is recognized as a CD drive.
3. Run the Setup.exe file to start the installation.
4. After installation, new devices are detected.
CU8210-D004-0200 Version: 1.0
Configuration
13