Alpine INE-W611D Map Update page 7

18) Navigation Software update is executed.
Do not disconnect the USB stick and do not power off the unit.
Please note: The Update process will take up to 2 minutes.
19) Confirm and finalize the update by pressing "Done". Remove the USB stick from your
navigation device. The USB stick must be prepared again for the next step.
The navigation firmware was updated successfully.
20) Switch off the navigation device via ignition (ACC) for 2 minutes or perform a reset. Then
switch the navigation device on again.
21) Go to Main Menu → scroll to right → About → Version Information to check the latest
Navigation Software Version (9.35.2.263746 Sep 21 2021 or newer).