Introduction Of The Charging Dock - MyGenie Smart Instruction Manual

Robot Operation
e. Introduction of the Charging Dock
1. Before using the dock station, please make sure it is connected to the power supply and adaptor.
2. Place the charging dock in a position flat on the ground with the back pushed up against a wall.
There should be no other objects with strong reflectors like mirror or obstructions two meters in
front of and one meter to the left, right and above the charging dock. And also avoid direct sunlight.
3. When the robot is finished in the planned cleaning, it will return to the charging dock
automatically.
4. During the cleaning process, if the power is too low ,the robot will go to dock station for charging
automatical I y(The robot will stop cleaning and al arm. Every 5 seconds will repeat alarm.)
07