Cleaning - Polaris FlexoPlast Instruction Manual

FlexoPlast
Auto Thermo Injection

(9-1) Cleaning

Clean the body of the device with a dry cloth. If needed, you
may dampen the cloth with a small dose of water or a non-fat
solvent (only for the body).
The user should always keep the device clean and free from
dirt, water or other unnoticed solvents.
Clean the heating compartment in high temperature. For this
purpose create a cleaning device with absorbent paper and
long pliers. Insert the cleaning device inside the heating com-
partment and clean the remaining objects inside the compart-
ment.
Keeping the outer parts of the muffle which lays on the injection
device clean is strongly recommended since the wax and other
remaining materials may get inside the muffle during the oper-
ation and contaminate the material and damage the injection
piece.
Cleaning the heating compartment should be performed once
per day or more if needed for full clearance of the heating com-
partment.
Cleaning should be performed after each working session
when the device is turned off and stable.
If there is a need to clean the interior of the device at the user's
discretion, please contact the after sale services department of
the company.
Before cleaning the exterior of the device, always turn the de-
vice off by putting the main switch on off. Never clean the de-
vice while connected to an electrical outlet.
Never use flammable, corrosive, alkali or toxic solvents for
cleaning the device.
31