Table of Contents
Advertisement
(5-3) environmental circumstances
It is important to choose an appropriate environment with
following conditions during installation and operation for
personal safety, correct operation and long lifetime.
Workplace temperature: 0-40oC
Maximum humidity: 75%
The device should not be used in a place where there is
danger of explosion or firing
The light of the place should be high enough so that all
parts of the device can be seen clearly.
The device should never be exposed directly to sunlight
or humidity of rain, etc.
Perform the following steps before using the device:
1.Flexoplast device is designed to be put on a stable
desk, parallel to land. All parts of the working desk
should be checked for stability.
2.After checking the input power of the device and
urban electricity connect the plug of the device to
the outlet (the working voltage of the device is based
on 220 v electricity)
The single-phase urban electricity source should
conform to the device's feeding source specifica-
tions.
FlexoPlast
Auto Thermo Injection
17
Advertisement
Table of Contents
