General Safety - Polaris FlexoPlast Instruction Manual

Maintenance

(8-1) General Safety

The user should fully read the recommendations and warnings
in this section and must follow them at all times. Following
these instructions guarantee the fault-free performance of the
device in long-term.
•Only the individuals trained by the installation and launch team
of Polaris Co. are authorized to use the product.
Do not touch the heating compartment when the device is on.
Before using the device, make sure that all device components
are installed properly.
Never use a defected device.
If the auxiliary equipment of the device are defected you are not
authorized to use the device. If used, the function of the device
will face problems and the product's guarantee will become
null. Therefore before using make sure that the auxiliary parts
are working.
•The working environment should be clean, free of any ob-
structions and fully lighted.
•In case any defects are observed in the performance of the
device please immediately stop using it and unplug the device
from power and contact the after sale services department of
the company and report the issue.
•Do not open the electrical and pneumatic parts of the device.
•Never replace the power supply or other parts directly con-
nected to the plug.
•The device should never be used for purposes other than
those defined for it.
•Never use gasoline or flammable solvents as cleaning agent.
Always use non-flammable, non-corrosion and non-toxic
agents.
28