Advertisement
Introduction
What's in the box
BR33 Wireless Panic Button
What you'll need
BH61 Wireless Alarm Hub
●
A working internet connection
●
A smartphone or laptop
●
A #2 Phillips driver (screwdriver or power drill)
●
¼ inch (6.35mm) drill bit if using wall anchors
●
Mounting positions
Above surface
3
Mount plate
(Attached to button)
Side of surface
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
sales@verkada.com
1 T10 Torx wrench
1 VHB adhesive
mounting strip
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
2 Wall mount screws &
2 wall anchors
1 CR123A battery
(Installed)
Below surface
Advertisement
