Handling - Canon imageFORMULA DR-7090C Reference Manual

● Make sure to disconnect the interface cable and
power cord when moving the scanner. If the
scanner is carried with these items connected, the
plugs and connectors may be damaged or cause
the scanner to fall and result in personal injury or
damage to the scanner.
■ Installing the Transportation Screws
When moving the scanner, you must secure the optical unit
using the three transportation screws that you removed.
Use the following procedure to return the optical unit to its
default position and install the transportation screws.
1. Connect the power cord.
2. Turn the power switch ON while holding down the
Enter and New File keys. (See p. 13.)
Enter
3. Continue to hold down the Enter and New File keys
until "Power Off" appears on the display panel, and
then turn the power switch OFF.
P o w e r O f f
4. Secure the optical unit by installing the three
transportation screws.
New File

Handling

WARNING
Note the following precautions whenever using the
scanner. Failure to do so may result in a fire or
electric shock.
■ Never place alcohol, benzene, paint thinners, or
other flammable substances near the scanner.
■ Do not cut, damage, or modify the power cord. Do
not place heavy objects on the power cord, and do
not pull or excessively bend the power cord.
■ Never connect the power cord when your hands
are wet.
■ Do not connect the scanner to a multiplug power
strip.
■ Do not knot or coil the power cord, as this may
result in a fire or electric shock. When connecting
the power cord, make sure that the power plug is
securely and completely inserted into the power
outlet.
■ To use a reel-type extension cord, unwind all of the
cord from the reel. Long-term operation with the
cord wound on the reel may cause the cord to
overheat and could cause a fire.
■ Do not use power cords other than the power cord
provided with this scanner.
■ Never try to take the scanner apart or modify it in
any way, as this is dangerous and may lead to a
fire or electric shock.
■ Do not use flammable aerosol sprays products
near the scanner.
■ When cleaning the scanner, turn the power switch
OFF and disconnect the power cord from the
power supply.
1
5