Advertisement
Quick Links
Operation Manual
Hydraulic Gearbox Jack
50795
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
Advertisement
Related Manuals for WilTec 50795
Summary of Contents for WilTec 50795
- Page 1 Operation Manual Hydraulic Gearbox Jack 50795 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps and technical data can differ insignificantly.
- Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
- Page 3 Ensure that the load cannot slip off the transmission jack. • After moving the loaded transmission jack for several centimetres, stop moving in order to check the balance of its load before continuing. © by WilTec Wildanger Technik GmbH Item 50795 Page 3 http://www.WilTec.de http://www.aoyue.eu...
- Page 4 • In case of the transmission jack having to be scrapped, make sure to drain the oil beforehand and to dispose of it in a proper and professional manner. © by WilTec Wildanger Technik GmbH Item 50795 Page 4 http://www.WilTec.de http://www.aoyue.eu...
- Page 5 Commissioning • Lifting: Press the pedal of the cylinder pump with your foot. • Lowering: Turn the side handwheel (Fig. 4) counter-clockwise to re-lower the gearbox jack. © by WilTec Wildanger Technik GmbH Item 50795 Page 5 http://www.WilTec.de http://www.aoyue.eu 2021-1...
- Page 6 Figures © by WilTec Wildanger Technik GmbH Item 50795 Page 6 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 7 Let go of the hand wheel once the desired height has been reached. Always make sure that loads are properly positioned in the centre of the retainer (4). © by WilTec Wildanger Technik GmbH Item 50795 Page 7 http://www.WilTec.de http://www.aoyue.eu 2021-1...
- Page 8 Exploded view © by WilTec Wildanger Technik GmbH Item 50795 Page 8 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
- Page 9 Castor Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 50795 Page 9 http://www.WilTec.de...