WilTec 50795 Operation Manual page 7

Quick guide
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
№
Name
1 Drain screw
2 Hand wheel
3 Pedal
4 Retainer
Loosen the drain screw (1) before using
the device.
Use the pedal (3) in order to lift the hy-
draulic piston rod until the desired
height has been reached.
Turn the hand wheel (2) counter-clock-
wise and hold it in that position in order
to lower the hydraulic piston rod. Let go
of the hand wheel once the desired
height has been reached.
Always make sure that loads are
properly positioned in the centre of the
retainer (4).
Item 50795 Page 7
09 2021-1