Advertisement
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Description
This transmission jack with a load capacity of 500 kg and a max. lifting height of 195 cm is ideal for
performing maintenance, repairs or assembly work on gearboxes and undercarriages. It can further be
used when replacing bearings under lifting platforms. The transmission jack can be conveniently placed
beneath the vehicle due to it being equipped with castors, can then be pumped to the required height
via the easy to operate foot pedal and afterwards be lowered without much effort by using the infinitely
variable hand wheel located on its side.
Rated
Model
load (㎏)
50795
500
Safety precautions and warnings
Please make sure to carefully read the information and safety instructions found within this operation
manual and adhere to them in order to ensure an ideal mode of operation while at the same time mini-
mising the risk of accidents. The instructions found in this manual thereby do not replace rules and
regulations applying at your workplace and instead complement them. Keep this manual and make sure
it is in reach when working with this product.
•
Familiarize yourself with all the information, instructions and warnings found in this manual as
well as the respective manuals of other tools being used.
•
Be knowledgeable about how to properly handle and apply the device.
•
The transmission jack may only be used for the installation and removal of gearboxes and as-
sociated parts (gearshifts, differentials etc.)
•
Make sure that all connection supports have been connected properly and securely.
•
This device can only be used by children or individuals with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge if they have received instructions concerning
the use of the appliance from and are being supervised by a person familiar with the product
and responsible for their safety.
•
Children have to be supervised at all times in order to ensure that they do not play with the
device.
•
Ensure that the process of lifting is not obstructed or hindered by other objects.
•
Always make sure that the load is properly and securely placed upon the centre of the retainer.
•
When loaded, the transmission jack may only be rolled across even flooring in a slow manner
and while its retainer has completely been lowered.
•
Ensure that the load cannot slip off the transmission jack.
•
After moving the loaded transmission jack for several centimetres, stop moving in order to check
the balance of its load before continuing.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Min. retainer
Max. retainer
height (㎜)
height (㎜)
1100
1950
Distance
saddle
arms (㎜)
325
Item 50795
Weight (㎏)
Size (㎝)
30
82×82×113
09
Page 3
2021-1
Advertisement
