WilTec 65066 Operation Manual

Hydraulic jack

Download this manual

Operation Manual

Hydraulic Jack

65066

Illustration similar, may vary depending on model

Read and follow the operating instructions and safety information before using for the first time.

Technical changes reserved!

Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.

Updating the documentation

If you have suggestions for improvement or have found any irregularities, please contact us.

Need help?

Do you have a question about the 65066 and is the answer not in the manual?

Page 1 Operation Manual Hydraulic Jack 65066 Illustration similar, may vary depending on model Read and follow the operating instructions and safety information before using for the first time. Technical changes reserved! Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Page 2 All rights re- served. The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this operating manual, nor in the diagrams and figures shown.
Page 3 Maintain the labels and nameplates on the lift. These carry important information. Technical data Max. load capacity (kg) 680 Min. width (mm) 1055 Max. width (mm) 1282 © by WilTec Wildanger Technik GmbH Item 65066 Page 3 http://www.wiltec.de 05 2024-1...
Page 4 Round pin ⌀12 Lifting frame Split pin Lifting arm Spring Base Hexagon head screw № Name Qty. Safety bar Handle Hexagon head screw Round pin ⌀16 Washer B-pin © by WilTec Wildanger Technik GmbH Item 65066 Page 4 http://www.wiltec.de 05 2024-1...
Page 5 Important notice: The reprint or reproduction, even of excerpts, and any commercial use, even in part, of this instruction manual require the written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 65066 Page 5 http://www.wiltec.de...