WilTec 50797 Operation Manual

Motorcycle jack/mini-lift

Operation Manual

Motorcycle Jack/Mini-lift

50797

Illustration similar, may vary depending on model

Please read and follow the operating instructions and safety information prior to initial operation.

Technical changes reserved!

Illustrations, functional steps and technical data may deviate insignificantly due to continuous further

developments.

Table of Contents

Need help?

Do you have a question about the 50797 and is the answer not in the manual?

Page 1 Operation Manual Motorcycle Jack/Mini-lift 50797 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps and technical data may deviate insignificantly due to continuous further...
Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
Page 3 Before use, re-check all components. With a component being damaged or unusable, first have it repaired. • In case the lifting force diminishes, open the drain valve and pump fifteen to twenty times to remove needless air from the hydraulic system. © by WilTec Wildanger Technik GmbH Item 50797 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
Page 4 Bearing Screw M6 Washer M6 Nut M6 Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 50797 Page 4 http://www.WilTec.de http://www.aoyue.eu...