Installing The Stack Bracket Kit - GE DCCH480EK Owner's Manual & Installation Instructions

KIT CONTENTS (GE KIT #GE24STACK)
Bracket-
stack (R)
TOOLS YOU WILL NEED
rPhillips screwdriver
rLevel
INSTALLATION PREPARATION
Remove the packaging.
Flatten the product carton to use as a pad to lay
the dryer down on its side. Continue using the
carton to protect the finished floor in front of
the installation location.
Installation Instructions
Screws (6)
Rubber
pads (4)
Bracket-
stack (L)
rGloves
INSTALLING THE STACK
BRACKET KIT
LAY THE DRYER ON ITS SIDE
1
A. Carefully lay the dryer on its side. Use the
packing material so you don't scratch the finish
on the dryer.
INSTALL RUBBER PADS
2
TO DRYER BASE
A. Locate the 4 rubber pads in the parts package.
Insert rubber pads onto the leveling leg.
B. Set the dryer upright.
23
¿ÀÈÄ 2:32:37