Subscribe to Our Youtube Channel
Related Manuals for MONARCH INSTRUMENT SLS-115
Summary of Contents for MONARCH INSTRUMENT SLS-115
- Page 1 MONARCH INSTRUMENT Instruction Manual SLS-115/230 Smart Laser Sensor 1.800.544.2843 www.calcert.com sales@calcert.com...
- Page 2 Dimensions: 5.38" (13.67cm) L (including snout) x 2.53" (6.42cm) W x 2.25" (5.72cm) H (including knob and feet) Dimensions in Inches [mm] Installation Environment: per IEC 664 Installation Category II per IEC 61010-1 Pollution Degree Level II 32 to 104 °F (0 to +40 °C) operating Temperature: 14 to 158 °F (-10 to +70 °C) storage Maximum relative humidity of 80% for temperatures...
- Page 3 TABLE OF CONTENTS TABLE OF CONTENTS OVERVIEW ..............1 INDICATORS AND SWITCHES ........1 QUICK START GUIDE ..........3 CONNECTION DETAIL ..........4 OPERATION ............... 5 5.1 Auto Mode ..............6 5.2 Manual Mode ..............6 ADVANCED FEATURE (TARGET POLARITY) ..... 7 AIMING THE LASER ...........
- Page 4 Operating Range: Up to 65 feet depending on target reflectivity: 1/2” reflective tape (T-5) @3600 RPM: up to 65 ft. (19.8 m) or up to 75° from target White/Black contrast @3600 RPM: up to 3 ft. (91 cm) or up to 45° from target Black mark on dental drill: up to 4 in.
- Page 5 Laser On LED Blinks when unit is first turned on. Remains lit when the laser beam is on. On solid whenever the unit is in the Auto Auto/Gain LED mode. It also blinks from 1 to 8 times to indicate the current gain whenever the gain is changed.
- Page 6 To aid in locating the laser dot over a large distance, hold a piece of white cardboard or equivalent in front of the laser. Progressively move the white surface closer to the desired target. Then adjust the aim of the laser as necessary. In areas of high ambient light (outdoors), performance can be enhanced at long distances by slipping a piece of black tube with a minimum inner diameter of 0.6 inches, over the nose piece to act as an extension nose piece.
- Page 7 Pulse/ 4.0 CONNECTION DETAIL RS232 Output The unit has an input power jack for DC power or recharging the batteries. Use only the PR Universal charger supplied. The unit also has a five-pin DIN output socket for Pulse outputs and RS232.
- Page 8 (negative pulse). The user can select either a positive or a negative output pulse using the Polarity switch (5). The gain of the input amplifier and the sensitivity can be adjusted manually or automatically. This allows the unit to be used with many types of targets at various distances and contrasting color conditions.
- Page 9 (negative pulse). The user can select either a positive or a negative output pulse using the Polarity switch (5). The gain of the input amplifier and the sensitivity can be adjusted manually or automatically. This allows the unit to be used with many types of targets at various distances and contrasting color conditions.
- Page 10 Pulse/ 4.0 CONNECTION DETAIL RS232 Output The unit has an input power jack for DC power or recharging the batteries. Use only the PR Universal charger supplied. The unit also has a five-pin DIN output socket for Pulse outputs and RS232.
- Page 11 To aid in locating the laser dot over a large distance, hold a piece of white cardboard or equivalent in front of the laser. Progressively move the white surface closer to the desired target. Then adjust the aim of the laser as necessary. In areas of high ambient light (outdoors), performance can be enhanced at long distances by slipping a piece of black tube with a minimum inner diameter of 0.6 inches, over the nose piece to act as an extension nose piece.
- Page 12 Laser On LED Blinks when unit is first turned on. Remains lit when the laser beam is on. On solid whenever the unit is in the Auto Auto/Gain LED mode. It also blinks from 1 to 8 times to indicate the current gain whenever the gain is changed.
- Page 13 Operating Range: Up to 65 feet depending on target reflectivity: 1/2” reflective tape (T-5) @3600 RPM: up to 65 ft. (19.8 m) or up to 75° from target White/Black contrast @3600 RPM: up to 3 ft. (91 cm) or up to 45° from target Black mark on dental drill: up to 4 in.
- Page 14 TABLE OF CONTENTS TABLE OF CONTENTS OVERVIEW ..............1 INDICATORS AND SWITCHES ........1 QUICK START GUIDE ..........3 CONNECTION DETAIL ..........4 OPERATION ............... 5 5.1 Auto Mode ..............6 5.2 Manual Mode ..............6 ADVANCED FEATURE (TARGET POLARITY) ..... 7 AIMING THE LASER ...........
- Page 15 Dimensions: 5.38" (13.67cm) L (including snout) x 2.53" (6.42cm) W x 2.25" (5.72cm) H (including knob and feet) Dimensions in Inches [mm] Installation Environment: per IEC 664 Installation Category II per IEC 61010-1 Pollution Degree Level II 32 to 104 °F (0 to +40 °C) operating Temperature: 14 to 158 °F (-10 to +70 °C) storage Maximum relative humidity of 80% for temperatures...
- Page 16 MONARCH INSTRUMENT Instruction Manual SLS-115/230 Smart Laser Sensor 1.800.544.2843 www.calcert.com sales@calcert.com...
Need help?
Do you have a question about the SLS-115 and is the answer not in the manual?
Questions and answers