Turning On And Off; Emergency Stop Button; Operation Modes - EcoFlow Solar Tracker User Manual

1.5.2 Turning on and off

Turn on the tracker by pressing the power button for 3 seconds. A long beep indicates that it is
powered on.
Turn off the tracker by pressing the power button for 3 seconds. A long beep indicates that it is
powered off. The stand will rotate back to its starting position, and then shut down automatically.
NOTE
Please note that the Solar Tracker won't be powered off if the solar panel is still connected and
getting solar power.

1.5.3 Emergency stop button

The emergency stop button is the red button located on the top of the control module. Pressing it
will stop the motor immediately and you will hear the beep sound.

1.5.4 Operation Modes

1
Mode changes
Powering on 10s after no operation
Degree of Lightness
Minimal: 0 to 25000 lux
Weak: 25000 to 50000 lux
Strong: 50000 to 80000 lux
Super strong: ≥80000 lux
Sound indicator
2
Power on: Beeps (increasing speed) for 10 seconds
Return to starting position: Beeps once per second
Sleeping mode: Quiet
Searching for light: Beeps once per second
Standby
: Quiet
Low light: Quiet
Strong light: Quiet
Manual: Beeps once per second
Shut down: Long beep, then beeps once per second
Emergency stop: Beeps five times per second
14
Returning to the
Minimal
starting position
Over 15 min
Sleeping Weak
Weak
Strong
Standby
Weak
Finding
sunlight
Tracking
sunlight