Advertisement
*If you plan to use foldable solar panels, please continue with step 5 to 7 to finish installation.
*If you plan to use foldable solar panels, please continue with step 5 to 7 to finish installation.
NOTE
Long press the power button. The indicator light will turn on. The solar tracker will begin rotating according to the lighting conditions.
NOTE
The wire harness needs to be secured to prevent it from being accidentally ripped off during rotation.
*If you plan to use the rigid solar panels, please continue with step 8 to 11 to detach the folding bars and finish installation.
NOTE
Long press the power button; The indicator light will turn on. The solar tracker will begin rotating according to the lighting conditions.
NOTE
The wire harness needs to be secured to prevent it from being accidentally ripped off during rotation.
NOTE
Please fold A3-LEFT and A3-RIGHT first, and then fold A1-LEFT and A1-RIGHT.
Detach the control module from the base stand. Fold the legs of the base.
The Solar Tracker can rotate 345° therefore it has a 15° blind spot. That means if you're in the northern hemisphere, you should position the front of the solar tracker to the east with a slight northern tilt. If you're in the southern hemisphere, you should position the front of the solar tracker to the east with a slight southern tilt.
NOTE
Please place the compass flat when positioning the Solar Tracker or use the compass on your phone to guide the direction.
Turn on the tracker by pressing the power button for 3 seconds. A long beep indicates that it is powered on.
Turn off the tracker by pressing the power button for 3 seconds. A long beep indicates that it is powered off. The stand will rotate back to its starting position, and then shut down automatically.
NOTE
Please note that the Solar Tracker won't be powered off if the solar panel is still connected and getting solar power.
The emergency stop button is the red button located on the top of the control module. Pressing it will stop the motor immediately and you will hear the beep sound.
Specifications | |||
Weight | 25KG | ||
Load capacity | 25KG | ||
Pitch axis range | 0–85° | ||
Yaw axis range | 0–345° | ||
Size | 2.5 × 1.5 × 1.5m (Minimum 2.5 × 1.1 ×1.1m) | ||
APP | Supported | ||
Built-in battery capacity | 5000mAh | ||
Waterproof | IP54 | ||
Wind resistance | 6 Strong Breeze | ||
Built-in battery* | |||
Battery chemistry | NCM | ||
Shelf life | 1 year(after full charge) | ||
Lifespan | 500 cycles to 80% capacity | ||
Operating temperature | -10°C~40°C (optimal: 25°C) |
*The built-in battery can be recharged from solar power. If the Solar Tracker is not in use for a long time, you can recharge the unit from the USB-C port (5 to 20V, 1A) port at the back of the Control Module.
Power on: Fast flashing (flash for 0.1s every 0.2s)
Working: Slow flashing (flash for 0.5s every 1s)
Sleep: Always on
NOTE
Please note that the Solar Tracker won't be powered off if the solar panel is still connected and getting solar power. The light indicator will keep short flashing (flash for 1s every 0.1s).
NOTE
Light indicator status:
Off
Flashing
On
If the Solar Tracker has not been used for a long time, please recharge the battery to 30-50% every 3 months. You can check the battery level from the battery level indicator or on the App.
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.
Advertisement
Thank you! Your question has been received!
Need Assistance?
Do you have a question about the Solar Tracker that isn't answered in the manual? Leave your question here.