Subscribe to Our Youtube Channel
Related Manuals for Aqua AQUACAL 1/2
Summary of Contents for Aqua AQUACAL 1/2
- Page 1 INSTALLATION USE AND INSTRUCTION MANUAL AQUACAL ½” – AQUACAL R L0200080 rev. 1.0 23/10/2020 1/10...
- Page 2 AQUACAL ENGLISH Polyphosphate salt feeder L0200080 rev. 1.0 23/10/2020 2/10...
-
Page 3: Table Of Contents
AQUACAL ENGLISH Polyphosphate salt feeder INDEX 1. WARNINGS ........................4 2. USE ..........................4 3. HYDRAULIC CONNECTION .................... 5 4. MAINTENANCE........................ 6 4.1 PREPARATION OF POLYPHOSPHATE ...Errore. Il segnalibro non è definito. 5. TECHNICAL CHARACTERISTICS .................. 7 L0200080 rev. 1.0 23/10/2020 3/10... -
Page 4: Warnings
AQUACAL ENGLISH Polyphosphate salt feeder 1. WARNINGS This manual is intended to provide all the information necessary for the correct installation of the AQUACAL product, for its correct use and for maintenance that will allow you to obtain the best results over time. In this regard, it is extremely important to carefully read the warnings listed below as they provide all the information necessary for safe installation, use and maintenance. -
Page 5: Hydraulic Connection
AQUACAL ENGLISH Polyphosphate salt feeder 3. HYDRAULIC CONNECTION It is advisable to connect the AQUACAL dispenser to the water system by inserting a special by-pass, in order to allow the operations of replenishing the polyphosphate salt inside the vessel. By using the AQUACAL–R dispenser, on the other hand, it is not necessary to carry out the by-pass since the reintegration of polyphosphate salt can be carried out simply by positioning the black levers horizontally. -
Page 6: Maintenance
AQUACAL ENGLISH Polyphosphate salt feeder 4. MAINTENANCE The AQUACAL can be used in water whose temperature does not exceed 50 ° C. When the bellows inside the jar is completely relaxed it is necessary to replenish the polyphosphate by performing the following operations: AQUACAL 1) open the tap A - FIG.A 2) close the BC taps - FIG.A... -
Page 7: Technical Characteristics
AQUACAL ENGLISH Polyphosphate salt feeder 5. SALT INTEGRATION In the AQUACAL is possible to use dissolved polyphosphate salt or tablets. If using powdered dissolved polyphosphate salt, follow the steps below: a. After closing the by-pass, remove the jar from the dispenser, wash it and rinse it to remove any impurities; b. - Page 8 AQUACAL ENGLISH Polyphosphate salt feeder 7. DIMENSIONI / DIMENSION AQUACAL ½” AQUACAL-R 1/2’’ AQUACAL ¾” – 1” L0200080 rev. 1.0 23/10/2020 8/10...
- Page 9 AQUACAL ENGLISH Polyphosphate salt feeder 8. CARATTERISTICHE TECNICHE / TECHNICAL FEATURES DATI TECNICI/TECHNICAL DATA Testa/Head Attacco/Connection Ottone/Brass Vaso/Sump Soffietto/Bellow EPDM Oring/Oring EPDM Pressione max. esercizio/Max working pressure 6 bar Pressione max. scoppio/Max. burst pressure 25 bar Temp. Acqua: max. consigliata/ Max. operating temp. Water 25°C Dosaggio/Feeding 2/4 ppm...
- Page 10 AQUACAL ENGLISH Polyphosphate salt feeder AQUACAL ½” – AQUACAL R L0200080 rev. 1.0 23/10/2020 10/10...
Need help?
Do you have a question about the AQUACAL 1/2 and is the answer not in the manual?
Questions and answers