If the Keyless Remote Battery is Weak
Models with information display
If the beeper sounds, the KEY BATT message appears on the information display,
and the ENGINE START/STOP button flashes, and the engine won't start, start the
engine as follows:
Models with driver information interface
If the beeper sounds, the To Start, Hold Remote Near Start Button message
appears on the driver information interface, and the ENGINE START/STOP button
flashes, and the engine won't start, start the engine as follows.
1. Touch the centre of the ENGINE START/
STOP button with the H logo on the keyless
remote while the ENGINE START/STOP
button is flashing. The buttons on the
keyless remote should be facing you.
u
The ENGINE START/STOP button
flashes for about 30 seconds.
2. Depress the brake pedal (continuously
variable transmission) or clutch pedal
(manual transmission) and press the
ENGINE START/STOP button within 10
seconds after the beeper sounds and the
ENGINE START/STOP button changes
from flashing to on.
u
If you don't depress the pedal, the mode
will change to ACCESSORY.
uuEngine Does Not StartuIf the Keyless Remote Battery is Weak
345