Honda CITY 2021 Manual page 109

uuGauges and DisplaysuGauges
■
Outside Temperature
Shows the outside temperature in Celsius.
Except Mexican models
If the outside temperature has been below 3°C at the time you set the power mode
to ON, the outside temperature indicator blinks for 10 seconds.
■
Adjusting the outside temperature display
Adjust the temperature reading up to ±3ºC if the temperature reading seems
incorrect.
Models with information display
1. Set the power mode to ON.
2. Press and hold the TRIP/CLOCK button for 10 seconds or more while the outside
temperature is shown on the information display.
u The information display goes into temperature adjustment mode. The display
starts showing from -3°C to +3°C.
3. Release the TRIP/CLOCK button when the right adjustment amount is shown.
u The adjustment is complete.
■
Clock
Shows the clock.
Models with driver information interface
■
Odometer
Shows the total number of kilometres that your vehicle has accumulated.
* Not available on all models
108
1Outside Temperature
The temperature sensor is in the front bumper. Road
heat and exhaust from another vehicle can affect the
temperature reading when your vehicle speed is less
than 30 km/h (19 mph).
It may take several minutes for the display to be
updated after the temperature reading has stabilised.
Models with driver information interface
You can adjust the temperature reading.
2 Settings P. 119
1Clock
You can adjust the time manually or change the clock
display to show the 12 hour clock or 24 hour clock on
the information display * or driver information
interface * .
2 Settings P. 119
2 Clock P. 128