Honda CITY 2021 Manual page 336

■
Getting Ready to Replace the Flat Tyre
Boot Floor Lid
Tool Kit
Spare Tyre Jack
Jack
Wheel
Blocks
The tyre to be replaced.
1. Open the boot floor lid.
2. Take the tool kit and jack out of the boot.
u Remove the jack by turning the jack's
end bracket to the left to loosen it.
3. Unscrew the wing bolt, and remove the
spacer cone. Then, remove the spare tyre.
4. Place a wheel block or rock in front and rear
of the wheel diagonal to the flat tyre.
uuIf a Tyre Goes FlatuChanging a Flat Tyre
1Changing a Flat Tyre
The compact/temporary spare tyre is smaller than the
regular tyre. Your vehicle's ground clearance reduces
when the compact/temporary spare tyre is installed.
Driving over road debris or bumps could possibly
damage the underside of your vehicle.
WARNING: The jack can only be used for helping an
emergency vehicle breakdown, not for changing the
regular seasonal tyre or any other normal
maintenance or repair operation.
NOTICE
Do not use the jack if it doesn't work properly. Call
your dealer or a professional towing service.
Do not use more than one compact/temporary spare
tyre at the same time.
Continued 335