Canon imageFORMULA CR-135i Operation & Maintenance Manual page 28

7
Attach the Pickup Roller.
IMPORTANT
Push down the roller until it clicks into place.
8
Attach the Feed Roller. Align the notch on the roller axis
with the hole on the roller.
IMPORTANT
Push down the roller until it clicks into place.
9
Attach the Separation Roller with pushing the Separation
OFF Mode Button. Align the notch on the roller axis with
the hole on the roller.
IMPORTANT
Push down the roller until it clicks into place.
10
Close the Feed Supporter to the right.
28