Table of Contents
Advertisement
[ How to set the DPC function ]
● Power Tuning
*
If the value cannot be returned to 9000 or more by means of the DPC function when
the bobbin case surface is free from stains and the bracket lifting is correctly set, it
will be necessary to carry out the power tuning.
*
Setting value =oFFd 2
The set values given below are the default values (factory-set
at the time of shipment). If any of the values is different from
the default values given below, change it to the default value.
Set ON/OFF of the DPC function in this step.
Setting value= 9999
– 17 –
Previous
page ❶
Setting value = SHS 100
Advertisement
Table of Contents
