Instructions For Hair Cutting - Sapir SP-1810-BN Instruction Manual

• The lever adds versatility to your clipper by allowing you to gradually change the
closeness of your cut without an attachment comb.
• When the lever is in the uppermost position, the blades will give you the closest cut
and leave the hair very short. Pushing the lever downward gradually increases the
cutting length.
• In its lowest position, the lever will leave the hair approximately the same length as
the #1 comb.
• The lever will also extend the use of your blades since a different cutting edge is used
in each setting.
• In addition, if extremely heavy hair cutting has jammed the blades, it will help you
remove hair that has become wedged between the two blades without removing the
blades.
• While the clipper is running, rapidly move the lever from "close cut" to "longer cut" a
couple of times. Doing this each time after you have finished using your clipper will
help to keep the blades clear. If your clipper stops cutting and this does not help, your
cutting blades are dulled. Replace them with new blades.

INSTRUCTIONS FOR HAIR CUTTING

Before starting the hair cut:
1. Inspect the clipper, making sure that it is free of oil between the cutting blade teeth and
turn the unit on to distribute the oil and to make sure it is running smoothly. Wipe off
any excess oil. This should be done after each use. While using the unit, untwist the
cord from time to time to avoid tangling.
2. Seat the person so their head is approximately at your eye level. This allow ease of
visibility while cutting and a relaxed control of the unit
3. Before cutting always first comb the hair so it is tangle free and as it is naturally worn.
4. Place a towel around the neck and shoulders of the person having the haircut.
Reminders
• Cut the hair in a relaxed and slow manner. Use short strokes only to work gradually
over the entire head.
• Always take off a little hair at a time; you can always trim off additional hair later.
• As you work, comb the hair frequently back into the style to which you are cutting.
• When cutting with this hair clipper it is better to leave the hair dry, not wet. With the
hair dry, it is much easier to control the amount of hair being cut.
_English_