Product Inspection; Item Check; Safety Check; Product Features - FineTek SIS2 Operation Manual

3. Product Inspection

3.1 Item check


Sensor (1)

Operation manual (1)

3.2 Safety check


Before unpacking, check the packaging for deformation or damage, and take photos to
be used as evidence.

After unpacking, checks the contents for deformation, damage or any quality problems,
and take photos to be used as evidence.

After unpacking, check whether the contents match your order and whether the quantity
is correct immediately.

In any case described above, please contact us within 7 days (attach photos).
Otherwise, free replacements or repairs will not be provided.

4. Product Features


Easy to install due to the standard connector. Protection rating IP67

The lightweight and compact design make it easy to carry and enable for quick
installation even in narrow spaces or difficult situations.

Probe material PEEK surface roughness Ra <0.8 is with good wear resistance.

The magnetic test action function allows immediate inspection of the wiring and device
proper operation.

Strong and durable stainless steel enclosure.

LED indicators provide field device status.

With overcurrent protection, the output would be immediately turned off when the
output circuit current is overloaded.

Can be applied to CIP environments.

Suitable for dry running protection and single-point level detection of powder or
granular medium in containers or pipelines.

It provides 2 output signals NPN or PNP.
6