GCC Technologies Elite XL-1208 Network Manual page 46

Using the Elite XL with Windows 95 and Windows NT
COM port configuration dialog box–
We recommend the above settings.
Note: The serial port settings in the printer's front panel menus must match the settings in this
dialog box. Check the settings and change them if necessary (see Chapter 2 in your manual).
Note that the serial port's Baud Rate submenu corresponds to the Bits per second drop-down
list box in the dialog box, while the DTR setting in the Flow Control submenu corresponds to
the Hardware setting shown above.
14. Click OK. (For local printers only.)
3-13