Elite Xl 1208 And 1208S Features; Tonermiser - GCC Technologies Elite XL-1208 Supplementary Manual

Elite XL 1208/1208S Supplement
Print Control Menu
The Print Control menu has been added between the Info Pages menu and the
Energy Save menu in the printer's front panel menu system. (See Chapter 2 of
the Elite XL User's Manual for detailed information about the Elite XL front
panel menu system.)
The Print Control menu contains four submenus: TonerMiser, Smoothing, Print
Cal. (calibration) Pages, and Calibration. See individual options on the follow-
ing pages for more information.
Macintosh and Windows interface changes
TonerMiser and Smoothing have been added to the Macintosh (LaserWriter 8
and Elite XL GX) Print Options dialog box. Smoothing has been added to the
Windows Options dialog box accessed via the Setup button.
For both the Elite XL 1208 and the 1208S, Super B has been added as a paper
size to the Paper pop-up menu in the Page Setup dialog box (for Macintosh)
and to the Paper Size drop-down menu in the Print Setup dialog box (for
Windows).
For the Elite XL 1208S, 12 x 20 has been added as a paper size to the Paper
pop-up menu in the Page Setup dialog box (for Macintosh) and to the Paper
Size drop-down menu in the Print Setup dialog box (for Windows). See
individual options on the following pages for more information.

Elite XL 1208 and 1208S features

This section of the supplement describes each Elite XL 1208 and 1208S feature
not mentioned in the Elite XL User's Manual.

TonerMiser

The TonerMiser feature decreases the amount of toner used to print a document.
Using TonerMiser enables you to increase the number of pages printed per toner
cartridge. However, the print quality will be decreased; black areas will be less
dense with a gray appearance and lines will not be sharp. Note: TonerMiser is
overridden when printing at 1200 dpi resolution.
Interface access:
Front Panel. TonerMiser can be turned on and off through the printer's front
panel. The TonerMiser option is located in the Print Control menu.
TonerMiser settings are Enabled and Disabled; Disabled is the default.
3