Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Hamwells Loopz
Summary of Contents for Hamwells Loopz
- Page 1 Quick Start Guide v1.0...
- Page 2 Enjoy your Loopz! Please read the quickstart guide before using the Loopz. We would like to point out the safety instructions which are included in the box. All manuals are available at www.hamwells.com. Save water, have a better shower * UV-C LED is only included with the Loopz...
- Page 3 How to start? 1. POSITION THE MODULE 1 ° Position the Loopz in such a way that there is a slope towards the drain to allow the water to flow towards it. 2. THE CONTROL UNIT Place the control unit and guide the power supply cable out the module through its cable duct.
- Page 4 5. PLACE THE DECK Make sure the deck falls into the recess. Please note, the Loopz’s maximum load is 100 kg / 220 lbs. 6. CONNECT THE ADAPTER Connect the Loopz’s 12V power supply cable to the power adapter cable. Connect the power adapter to a power source.
- Page 5 LED on the control panel, it should be continuously on. LED signal The LED on the control panel has three distinct patterns giving feedback on the usage of the Loopz. These are: blinking, continuously on and fading in and out. fill the reservoir ready for use...
- Page 6 Showering 9. USING THE LOOPZ Once the LED is continuously on, the Loopz is ready for use. Press the push button to start the shower, push it again to stop. Please note, the recycled water is not drinking water. Please, limit the amount of soap used.
Need help?
Do you have a question about the Loopz and is the answer not in the manual?
Questions and answers