Video Input; Selecting Input Source - Canon LV-7355 LV-7350 Owner's Manual

VIDEO INPUT

DIRECT OPERATION
Choose Video by pressing INPUT button on Top Control or on Remote
Control Unit.
If projector cannot reproduce proper video source, select correct input
source through MENU OPERATION (see below).
MENU OPERATION
1 Press MENU button and ON-SCREEN MENU will appear. Press
POINT LEFT/RIGHT button to move a red frame pointer to
INPUT Menu icon.
2
Press POINT DOWN button to move a red arrow pointer to
Video and then press SET button. Source Select Menu will
appear.
3 Move a pointer to the source that you want to select and then
press SET button.
Projector automatically detects incoming Video signal,
Auto
and adjusts itself to optimize its performance.
• When both Y jack and S-VIDEO jack are connected, S-
VIDEO jack has priority over Y jack.
• When both Y-Pb/Cb-Pr/Cr jacks and S-VIDEO jack are
connected, Y-Pb/Cb-Pr/Cr jacks have priority over S-
VIDEO jack.
When video input signal is connected to Y jack, select
Video
Video.
When video input signal is connected to S-VIDEO jack,
S-Video
select S-Video.
When video input signal is connected to Y-Pb/Cb-
Y,Pb/Cb,Pr/Cr
Pr/Cr jacks, select Y, Pb/Cb, Pr/Cr.
30

SELECTING INPUT SOURCE

INPUT button
Video
Computer 1
Computer 2
INPUT MENU
Move the pointer to Video
and press SET button.
VIDEO
Source Select Menu (VIDEO)
Move the pointer to the source and press SET button.