Positioning Projector; Adjustable Feet - Canon LV-7355 LV-7350 Owner's Manual

Canon owner's manual multimedia projector lv-7355 lv-7350

Hide thumbs Also See for LV-7355 LV-7350:

Brochure & specs (2 pages)

Table Of Contents

Table of Contents

G This projector is designed to project on a flat projection surface.

G The projector can be focused from 3.6 '(1.1m) ~ 27.6'(8.4m).

G Refer to the figure below to adjust a screen size.

H1 : H2 = 9 : 1

3.6' (1.1m)

28"

Screen Size

(W x H) mm

569 x 427

Zoom (min)

3.6' (1.1m)

Zoom (max)

–––––

Picture tilt and projection angle can be adjusted by rotating

Adjustable Feet. Projection angle can be adjusted to about 16

degrees.

Lift the front of a projector and pull Feet Lock Latches on

both sides of the projector.

Release Feet Lock Latches to lock Adjustable Feet and

rotate Adjustable Feet to fine tune position and tilt.

To retract Adjustable Feet, lift the front of the projector and

pull and undo Feet Lock Latches.

Keystone distortion of a projected image can be adjusted by

Menu Operation. (Refer to P20 and 35.)

CAUTION

Avoid positioning a projector with the angle of more than 20

degrees. Projection Lamp may malfunction.