Mounting Lens Cover; Moving Projector - Canon LV-7355 LV-7350 Owner's Manual

PREPARATION
When moving this projector or when it is not used for an extended
period, replace Lens Cover.
Before replacing Lens Cover, be sure to turn the projector off and
disconnect AC Power cord from an AC outlet.
1 Secure Strap for Lens Cover through a hole of Lens Cover.
2 Turn the projector upside down and secure Strap for Lens
Cover to a hole on the bottom of projector with a screw.
Use Carry Handle when moving a projector.
When moving a projector, replace Lens Cover and retract
Adjustable Feet to prevent damage to the lens and cabinet.
When a projector is not in use for an extended period, put it into
the case (carrying bag) supplied with the projector.
CAUTION
Carrying Bag (supplied) is intended for protection from dust and
scratches on the surface of a cabinet, and it is not designed to
protect an appliance from external forces. Do not transport a
projector through a courier or transport services with this bag. The
projector can be damaged. When handling a projector, do not
drop, bump, subject it to strong forces or put other things on the
cabinet.
CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR
G Do not drop or bump a projector, otherwise damages or malfunctions may result.
G When carrying a projector, use a suitable carrying case.
G Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause
damage to the projector. To transport a projector through a courier or transport service, consult your dealer for best
way.
10

MOUNTING LENS COVER

MOVING PROJECTOR

LENS COVER
STRAP FOR LENS COVER
Secure it to the hole with a screw.