Advertisement
Adjusting the Pivot Head
M 2
- The pivot head can pivot to a
range of 90°; with detents every 15°. Pivot head to
desired position. Allow the detent to snap into
place. Do not forcibly pivot the head.
M18 T LED - The pivot
head can pivot to a
range of 135°; with
detents every 10°. Pivot
head
to
desired
position.
Allow
detent to snap into
place. Do not forcibly
pivot the head.
OPERATION
To turn on the work light, press the ON/OFF but-
ton. To turn off the work light, press the ON/OFF
button again.
Hook
M18 T LED
To
use
the
hanging
hook,
press
in
the
hook joint. Pull
the hook out.
MAINTENANCE
To reduce the risk of injury,
WARNING
always unplug the charger and
remove the battery pack from the charger or
tool before performing any maintenance.
Never disassemble the tool, battery pack or
charger. Contact a MILWAUKEE
facility for ALL repairs.
Maintain Work Light
Keep your work light, battery pack and charger in
good repair by adopting a regular maintenance
program. If the work light does not work properly,
return the work light to a MILWAUKEE
facility for evaluation and repair.
Cleaning
Keep tool handles clean, dry and free of oil or
grease. Use only mild soap and a damp cloth to
clean the tool, battery pack and charger since
certain cleaning agents and solvents are harmful
to plastics and other insulated parts. Some of
these include petrol, turpentine, lacquer thinner,
paint thinner, chlorinated cleaning solvents,
ammonia and household detergents containing
ammonia. Never use flammable or combustible
solvents around tools.
ACCESSORIES
Always remove battery pack
WARNING
before changing or removing
accessories.
Only
specifically
recommended
Others may be hazardous.
For a complete listing of accessories, refer to your
MILWAUKEE
Electric Tool catalogue or go online
®
to milwaukeetool.com.au / milwaukeetool.co.nz or
contact a distributor. To obtain a catalogue,
contact your local distributor or a service centre.
the
Press
®
use
accessories
for
this
Pull
out
service
service
®
tool.
3
Advertisement
