Advertisement
IMPORTANT SAFETY INSTRUCTIONS
READ AND UNDERSTAND ALL
WARNING
INSTRUCTIONS. When using
electric appliances, basic precautions should
always be followed, including the following:
Do not charge non-rechargeable
WARNING
batteries.
Before using the work light, read this operator's
manual, your battery pack and charger operator's
manual, and all labels on the battery pack, charger
and work light.
• To reduce the risk of injury, close supervision
is necessary when an appliance is used near
children.
The lens gets very hot
WARNING
during use. To reduce the risk
of burns, do not touch hot lens.
• Store idle work light out of reach of children.
Warm work lights can become hazardous in the
hands of children.
• Do not use outdoors.
Batteries must be recharged only with the
•
charger specified by MILWAUKEE
that may be suitable for one type of battery may
create a risk of fire when used with another
battery.
• Use work light only with specifically desig-
nated battery pack. Use of any other batteries
may create a risk of fire.
• When battery pack is not in use, keep it away
from metal objects like: paper clips, coins,
keys, nails, screws, or other small metal objects
that can make a connection from one terminal
to another. Shorting the battery terminals together
may cause sparks, burns, or a fire.
• Maintain labels and nameplates. These carry
important information.
•
The light source contained in this luminaire shall
only be replaced by the manufacturer or his
service agent or a similar qualified person.
SAVE THESE
INSTRUCTIONS
SPECIFICATIONS
Cat. No. ........................ M12 T LED / M18 T LED
Volts............................................... 12V / 18 V DC
Watts ................................................. 4 W / 3.7 W
Charger Type............................................. M18™
Use only MILWAUKEE
battery packs.
ADDITIONAL BATTERY SAFETY RULES
To reduce the risk of fire, personal
WARNING
injury, and product damage due to
a short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow
inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and
bleach or bleach-containing products, etc., can
cause a short circuit.
Do not charge non-rechargeable
WARNING
batteries.
. A charger
®
M12 or M18 Li-Ion
®
SYMBOLOGY
Warning
Volts
Direct Current
Read Operator's Manual
Indoor use
Do not stare into light.
Class III protection
Regulatory Compliance Mark (RCM).
This
regulatory requirements.
Do not dispose of electric tools
together
material. Electric tools and electronic
equipment that have reached the end
of
their
separately
environmentally compatible recycling
facility.
FUNCTIONAL DESCRIPTION
1
1. Bezel
assembly
2. On/Off
button
3. Magnet
4. Hook
5. Pivot head
ASSEMBLY
Recharge only with the charger
WARNING
specified for the battery. For
specific charging instructions, read the
operator's manual supplied with your charger
and battery.
Inserting/Removing Battery Pack
Insert the battery pack by sliding battery pack into
the body of the tool. Insert the battery pack until
the battery latches lock.
To remove the battery pack, press in both battery
latches and slide the battery pack off of the tool.
To reduce the risk of injury, do
WARNING
not look directly into the light
when the work light is on.
2
product
meets
with
household
life
must
be
and
returned
5
3
2
2
applicable
waste
collected
to
an
5
4
Advertisement
