Operation; Power; Projector Placement - DigiTech AP4010 Instruction Manual

OPERATION:

Power

Plug the AC/DC power adapter
(included) into a standard wall
outlet and the DC power input
on the left side of the unit. After
connecting power, please allow
approximately 5 seconds to pass
before powering the unit ON.

Projector Placement

For best results, place the projector in a dark room or other dimly lit area. Use the
unit with a dedicated projector screen for best picture resolution. If placing the
projector behind the viewing screen (unit in front of/projecting toward viewers), a
special screen will be required. Projector screens are not included. If you are not
using the unit with a screen, a smooth, white or lightly colored surface will provide
the best results.
THE CENTER
OF LENS
7 2
"
6 0
"
5 0
"
4 5
"
3 7
"
9
The projector can
display up to 150"