New Holland T7.240 Service Manual page 38

M8 1,25x25
Tensioner bolt
M10 1,5x60 9.8
Fan mounting bolt
M10
Fan pulley bolt
Fan spacer or attachment pulley bolt (where necessary)
M6
M10
M12
Alternator bolt
M8 1,25x30
M12 1,75x120
Nut M12 1.75
M10 1,5x25
M10 1,5x40
Nut M10 1.5
M16 1,5
Fuel pump mounting studs:
M8
Injection pump fixing bolts:
M8 1,5
Injection pump gear fixing nut
M18 1,5
Connecting bolt for the injection pump on the distributor line:
M12 1,5
Oil pressure sensor bolt:
Bolt for the speed sensor of the switch box camshaft:
M6
Bolt for the speed sensor on the crankshaft front cover
M6
Temperature sensor bolt for the cylinder head:
M14 1,5x12
Air temperature sensor bolt for the intake manifold:
M6 1x20
Bolt for the intake manifold air temperature and pressure sensor:
M5
Fuel pressure sensor bolt:
Fuel temperature sensor bolt:
M14 1,5x12
Air compressor gear bolt:
5/8 in
Crankcase air compressor bolt:
Nut M12
Engine - Special tools
T7.240
T7.245
T7.260 With cab, 18X6, TIER 3 [HCCZ7245CFCP38297 - ]
380000665
380000663
380001099
Engine - Engine and crankcase
Part
2nd phase
47770440A 15/02/2017
10.1 [10.001] / 5
1st phase 24 ± 4 (17.7015 ± 2.9502)
43 ± 6 (31.7152 ± 4.4254)
37.0 – 49.0 N·m (27.3 – 36.1 lb ft)
33 ± 5 (24.3395 ± 3.6878)
37.0 – 49.0 N·m (27.3 – 36.1 lb ft)
10 ± 2 (7.3756 ± 1.4751)
43 ± 6 (31.7152 ± 4.4254)
77 ± 12 (56.7923 ± 8.8507)
24 ± 4 (17.7015 ± 2.9502)
43 ± 6 (31.7152 ± 4.4254)
24 ± 4 (17.7015 ± 2.9502)
12 ± 2 (8.8507 ± 1.4751)
24 ± 4 (17.7015 ± 2.9502)
105 ± 5 (77.4440 ± 3.6878)
20 ± 2 (14.7512 ± 1.4751)
8 ± 2 (5.9005 ± 1.4751)
8 ± 2 (5.9005 ± 1.4751)
8 ± 2 (5.9005 ± 1.4751)
20 ± 3 (14.7512 ± 2.2127)
3 ± 1 (2.2127 ± 0.7376)
3 ± 1 (2.2127 ± 0.7376)
35 ± 5 (25.8147 ± 3.6878)
20 ± 3 (14.7512 ± 2.2127)
125 ± 19 (92.1953 ± 14.0137)
81 ± 12 (59.7425 ± 8.8507)
LA
LA
LA
Tool to extract crankshaft front seal
Tool to extract crankshaft rear seal
Injector extractor
TorqueNm (lb ft)
-
-
-
-