Fluids And Lubricants - New Holland T7.240 Service Manual

Fluids and lubricants

Models T7.240, 245, and 260
System
Engine lubrication – with filter
Cooling system
Transmission
Maximum level
Extra level (*)
Braking system
Front axle – central reservoir
Default
Cane harvester
Front axle – Cane harvester
extensions
Front axle – final drives (hubs)
Fuel tank – main (*)
Fuel tank – auxiliary (*)
Grease fittings
Air conditioning – refrigerant
gas
Air conditioning – compressor
lubricant
Windshield washer
(*) Extra level only if the implement uses the tractor oil.
(*) Theoretical fuel tank volume. Use only as a reference for the net volume of the tank.
NOTE: To avoid damage to your machine, always use the same type of coolant. When you top up, use pure water.
If you change the additive used, clean the cooling system first. For more information, see the procedures in Engine
cooling system - Basic instructions (10.400).
NOTE: Always check that the implement does not use more oil than is available in the tractor. The transmission
should have at least the minimum oil level in order to operate.
INTRODUCTION
Quantity
15.0 L (3.96 US gal)
22.5 L (5.9 US gal)
82.0 L (21.7 US gal)
100.0 L (26.4 US gal)
As required
11.0 L (3.0 US gal)
17.5 L (4.6 US gal)
2.7 L (0.7 US gal)
2.5 L (0.6 US gal)
300.0 L (79.3 US gal)
105.0 L (27.7 US gal)
As required
1100 g
As required
As required
47770440A 15/02/2017
20
Recommended fluid
NEW HOLLAND AMBRA
MASTERGOLD™ HSP ENGINE
OIL SAE 15W-40
50% of water and 50% of
NEW HOLLAND AMBRA
ACTIFULL™ OT EXTENDED
LIFE COOLANT
NEW HOLLAND AMBRA
MULTI G™ HYDRAULIC
TRANSMISSION OIL
NEW HOLLAND AMBRA
BRAKE LHM
NEW HOLLAND AMBRA
MULTI G™ HYDRAULIC
TRANSMISSION OIL
Petroleum diesel fuel (B7
Biodiesel)
NEW HOLLAND AMBRA GR-9
MULTI-PURPOSE GREASE
CNH R HFC-134
EFRIGERANT
S SP-10 L
ANDEN UBRICANT
Water and T P
UTELA ROFESSIONAL
SC35 liquid
International
specification
ACEA E7 API CI-4
CES 20078
ASTM D 6210
– Monoethylene
glycol
SAE 10W-30 API
GL-4
-
SAE 10W-30, API
GL-4
-
NLGI2
-
A
-
-