USING THE PROJECTOR
Powering on / off the projector
Powering on
1.
Securely connect the power lead and signal/source cable. When connected, the On/Standby LED will
turn red.
2.
Turn on the projector by pressing the "
3.
A start up screen will display in approximately 10 seconds and the On/Standby LED will be flashing
blue.
Notee:
The first time the projector is turned on, you will be prompted to select the preferred language, projection
orientation, and other settings.
or
Enter
Enter
" button on the projector keypad or the remote control.
19
English