Fujitsu PRIMERGY LTO4 User Manual page 71

10
For search and installation options, select [Search for the best
driver in these locations] and set the following options.
• Uncheck [Search removable media (floppy, DVD-ROM, etc.)].
• Check [Include this location in the search] and specify the folder which restored the device
driver.
• When restored in the floppy disk drive A
A:\LTO4HH
• When restored in Temp folder of the drive C
C:\Temp\LTO4HH
11
Click [Next >].
The "Completing the Hardware Update Wizard" message appears.
12
Click [Finish] to exit.
13
Perform redirect operation to Virtual Server.
For procedures for performing the redirect operation, refer to "Operation after installing
internal backup device" in "User's Guide".
When the redirect operation for the Virtual Server is completed, [Quantum LTO 4 Tape
Drive] appears under "Tape Drive" in the "Device Manager" of the Virtual Server.
14
After installing the device driver by repeating Steps 4 – 12 in
Virtual Server, restart Virtual Server.
3 How to Install and Introduce this Product to the Server
E
71