Leadtek Quadro Series General Manual page 31

nView Desktop Manager
Display Driver Installation and Enabling SLI
Follow the steps listed below to install your driver software:
1. Power on the system and log into Windows.
2. Cancel the Windows "Found New Hardware Wizard" (you should see this
window twice one for each graphics board) and run "setup.exe" in the SLI driver
you saved to your desktop previously to start the software installation process (if
you open the zip file, you should see the "setup.exe" file).
3. Follow the "Next" prompt to proceed with driver installation. You should see the
message "NVIDIA Quadro FX xxxx has not passed Windows Logo testing to
verify its compatibility with Windows XP." This is because the SLI driver was
not included on the Microsoft Windows XP CD. Click "Continue Anyway" to
proceed with driver installation. You should see this message a second time
because the SLI installer will detect the presence of the second graphics board and
install driver software for it as well. If this happens, click "Continue Anyway" a
second time.
4. Once the software has been installed, choose "Yes, I want to restart my computer
now" and select "Finish" to reboot the system.
SLI Installation
Leadtek Quadro Series General Guide 1-29