Leadtek Quadro Series General Manual page 15

Understanding the NVIDIA Control Panel
To change the view:
• From the View menu, select Standard,Advanced,or Custom.
Note: For the Custom command to be available, you must define a custom
view as described in the following section.
Defining Custom Views
You can customize NVIDIA Control Panel to display only the application
category pages you want to see and use.
To specify which the pages to display:
1 Select View > Define Custom View... or for quicker access, use the toolbar if
you have it enabled.
2 On the Create Custom View page, for each application category that appears,
select (check) the check boxes for the pages that you want to view and click
OK.
3 To leave the Custom View mode, select either Standard or Advanced from the
View menu or for quicker access, use the toolbar if you have it enabled.
4 To switch back to your custom view, select Custom.
Leadtek Quadro Series General Guide 1-13